E-Series
 
Toro E-Series
OSMAC® Field Satellite
Features
• A larger station count, offering 48 stations when used with TouchNet central and up to
64 stations when used with SitePro central software
• Synthesized decoder modules that can be reprogrammed in the field—new frequency modules can store up to four preprogrammed
frequencies to transition from construction
to permanent frequencies (narrow band)
• Stainless steel (painted) and bi-wall plastic cabinet configurations
• Five terminal-strip options available, depending on application and customer needs
• Run up to 12 solenoids simultaneously (with pump) for a total secondary output of 3.0 amperes (holding) at 24 V ac (800S Series sprinklers allow more simultaneous station operation)
• Selectable 120- or 240-volt input voltage as a standard feature
• Colored LED indicators to confirm 24, 9- and 5-volt power to various boards within the cabinet makes troubleshooting a snap
• LEDs for each station output
• Simple self-testing by sliding a switch, or more in-depth field diagnostics are available
(with a 9-pin adapter and laptop-link)—more than eight separate functions can be verified
• Terminal block positions allow for same-length wire use and faster installation
• Internal antenna allows for a smaller profile cabinet
• Enhanced surge protection lowers operating costs
• Uses automotive fuses that are readily available for serviceability
• Patented Hot Post for each eight-station module
• Smart OSMAC upgrade provides the following capabilities:
• Runs in stand-alone mode:
• Can be used as a backup in case of central failure or can run the system prior to central installation
• Runs off the hand-held radio
• Sequential multi-station function available
• Multiple start times per program
• Multiple stations per program
• Up to 10 programs can run simultaneously with
one station per program
• Provides ability to download program from a PDA or laptop
• Utilizes Flex Memory for maximum programming flexibility
• Create or edit programs by using a PC or PDA
• Default programs factory-installed, allowing
immediate operation
• Factory default settings:
• Eight programs
• Eight stations per program
• Smart OSMAC EPROMS come factory installed
• Smart OSMAC software upgrade is required to enable Smart OSMAC capabilities (see page 46 for ordering information)
• Upgrade includes:
– Smart OSMAC software
– Serial cable
– PDA
 
Electrical Specifications
• Input power:
• 120/240 V ac, 50 or 60 Hz
• 0.20–0.22 amps, 110–120 V ac, 60 Hz (no load)
• 0.86–0.96 amps, 110–120 V ac, 60 Hz (maximum load)
• 0.095–0.105 amps, 220–240 V ac, 50-60 Hz
(no load) 0.43–0.47 amps, 220–240 V ac, 50-60 Hz
(maximum load)
• Output power:
• 24 V ac
• 3.0 amps maximum station load
• UL approved Mechanical Specifications
• Dimensions:
• Plastic cabinet: 16” W x 39” H x 16” D
(41cm W x 99cm H x 41cm D)
• Stainless steel (painted) cabinet:
13” W x 36” H x 13” D
(33cm W x 91cm H x 33cm D)
• Shipping weight:
• Plastic cabinet: 32 stations, 68 lbs. (31 kgs)
• Stainless steel (painted) cabinet: 32 stations, 80 lbs. (36 kgs)